• <nav id="is4ai"><nav id="is4ai"></nav></nav>
  • <input id="is4ai"><strong id="is4ai"></strong></input>
  • Welcom to Changzhou Qiangyu Metal Products Co., Ltd.! HOME |  CONTACT | 






    Add:Jinjiatang NO.1, Hengshanqiao Town, Changzhou City, Jiangsu Province


    Position:Home > News

    Aluminum alloy truss installation process

    time:2017-06-26 view:1077

    The material required for the construction of a 12*6*6m light frame: 12 aluminum trusses, 8 aluminum trusses, 8 aluminum trusses, 8 oblique supports and 4 iron bases. 4 heads, 4 squares, 4 cross arms, 4 slings, 4 hanging hoists, screws, etc. The reverse head in the aluminum truss: a 1 meter truss with a loose-leaf connection in the middle, the upper part can be rotated 180 degrees along the connecting axis. The main installation steps are:

    1. The two ends of the beam are respectively connected to the two square sleeves on both sides, and the beam portion is assembled on the ground;

    2. Connect the column truss flat and connect it, then screw one end to the opposite head and the other end to the cross arm. At the same time, link the hanging hoist and cross arm. The function of the hoist is to raise the lower beam truss. ;

    3. Connect the wrench (combined by five sets of springs, screws, heads, nuts and wrenches).

    4, beautiful appearance, strong brightness, no rust, repeated use, strong bearing capacity, easy disassembly and assembly, convenient transportation and storage.